
Grounded Combat Mechanics Adjustments
Skill- and impact-based guard breaks, cumulative defensive pressure, thrust guard penetration, crowd-gap attacks, out-of-combat health recovery, in-battle captain assignment, and formation-level shield/two-handed weapon orders. Fully modular, NOT depend on WarSails DLC, MCM-configurable.
查看大图This mod originally started as a blocking mod after I got fed up with peasants repeatedly blocking my two-handed axe with wooden sticks. The original goal was to make melee combat more reasonable, fluid and realistic. As development continued, I ended up reworking several other combat mechanics I considered unreasonable, while adding a number of features to improve the overall gameplay experience.
The mod now includes independent modules for [b]guard breaks, improved cavalry charges, in-battle captain assignment, crowd-gap attacks, out-of-combat health recovery, formation-level shield-stow / two-handed weapon orders, battlefield feats, and customizable health bar displays.[/b]
[b]My philosophy is simple: I want Bannerlord's combat to feel smoother, more satisfying and unpredictable, while keeping the overall game balance reasonably intact.[/b]
[b]All major modules can be enabled or disabled independently. The default settings are what I personally consider reasonably balanced, but almost every parameter and module toggle can be adjusted through MCM (or Shift + CTRL + M without MCM).[/b]
The mod does [b]NOT require the War Sails DLC[/b].
It has been tested alongside major combat mods such as RBM, RCM and RCA without conflicts. However, using multiple stance systems simultaneously is not recommended, as stagger calculations may overlap and cause balance issues. If you use RBM, I recommend disabling its stance system.
For those interested in the actual combat calculations, you can enable the diagnostic display at the bottom of the settings menu. Guard-break thresholds and defensive pressure values will then be displayed in real time during combat.
Since this mod encourages more aggressive fighting, battles may become somewhat faster. If you prefer slower, grindier battles where heavily armored troops can hold the line for longer, I recommend pairing it with armor-enhancing mods such as RCM or RBM.
[size=5][b]Requirements [/b][/size]
Mount & Blade II: Bannerlord [b]1.4.x / 1.5.5[/b]
[list]
[]Harmony[/]
[]For bugs, feedback or suggestions, you can contact me through the QQ group: [b]1105727960[/b][/]
[/list]The mod has been tested extensively in my own heavily modded setup. It is designed as a lightweight combat mod with maximum compatibility and can be removed at any time. That said, conflicts with other mods that directly modify combat mechanics cannot be completely ruled out.
The latest version supports the entire 1.4.x series as well as 1.5.5. However, the 1.5.5 game build itself still has stability issues, so if you encounter problems specifically on 1.5.5, there is a good chance they originate from the game rather than this mod.
[line]
[b][size=5]10.12 Update[/size][/b]
[b][size=4]I. Cavalry Charge Overhaul[/size][/b]
Vanilla cavalry has always felt underwhelming to me. This update aims to make heavy cavalry function as actual shock troops capable of breaking enemy formations, without simply giving their horses more damage and turning horses into four-legged killing machines.
[size=4][b]1. Reworked Horse Collision and Stopping Mechanics[/b][/size]
Horse collision reactions have been reworked.
When a charging horse encounters infantry, weapon attacks or formation collisions, the resistance and resulting speed loss are now calculated using [b]the rider's body weight, equipment weight, horse weight, horse equipment weight, current speed and charge momentum.[/b]
Compared with vanilla:
[list]
[]Lightly equipped infantry can no longer stop a heavy cavalry charge quite so easily.[/]
[]Heavier cavalry has significantly better breakthrough capability.[/]
[]Low-speed collisions will not produce unrealistically powerful impact effects.[/]
[]Above a certain speed threshold, ordinary weapon attacks can no longer rear a charging horse. Properly braced spears remain an exception.[/]
[]A light horse with an unarmored rider will still have roughly the same underwhelming charge performance and stopping resistance as vanilla cavalry. The heavier the total mounted load and the faster the horse, the harder it becomes for infantry to stop it.[/]
[/list][b]The main difference between this system and cavalry improvements in RBM or Warbandlord is that I have NOT increased horse charge damage.[/b]
[size=4][b]2. Formation Cavalry Charges Have Greater Impact[/b][/size]
A group of cavalry charging together should be much harder to stop than a single horse riding into an infantry formation.
This module attempts to reproduce that effect.
[list]
[][b]More effective mass charges:[/b] Cavalry charging together in the same direction gain additional resistance against being stopped, helping them maintain their forward momentum.[/]
[][b]Formation size and cohesion both matter:[/b] The size of a coordinated cavalry group determines the maximum available bonus, while the density of nearby friendly cavalry determines how much of that bonus is actually gained. Isolated riders or scattered formations receive much smaller benefits. The overall bonus remains within a reasonable range.[/]
[][b]Better charge continuity:[/b] The group charge bonus also lowers the speed threshold required to resist horse-rearing reactions from ordinary attacks, making cavalry less likely to be interrupted while charging.[/]
[][b]Braced spears remain effective counters:[/b] Infantry using properly braced spears can still rear even a fast-moving, heavily armored warhorse.[/]
[][b]No additional damage or movement speed:[/b] This system mainly improves the ability of cavalry to maintain a charge. It does not increase horse charge damage or maximum horse speed.[/]
[/list][size=4][b]3. Reworked Mounted Guard Breaks[/b][/size]
Mounted attacks now place much greater emphasis on impact and momentum.
[list]
[][b]Horse speed[/b] contributes significantly more to guard-break probability and stagger strength. The overall effectiveness is still kept within what I consider a reasonably balanced range.[/]
[]Mounted attacks generally have greater guard-breaking and staggering power than attacks performed on foot.[/]
[][b]Couched lance attacks[/b] receive the strongest impact multiplier and benefit the most from horse speed.[/]
[]Normal mounted polearm thrusts come next, followed by regular mounted swings.[/]
[/list]A heavily armored knight charging at full speed with a lance should be considerably more intimidating than someone swinging a sword from a nearly stationary horse.
[b][size=4]4. New Special Attack: Lance Impalement[/size][/b]
[b]Available to both player and AI cavalry.[/b]
Riders with [b]Riding and Polearm skills above 150[/b] can perform a special lance impalement attack.
To trigger it in actual combat, the rider must land a [b]high-speed couched lance hit on the enemy's chest or abdomen[/b], incapacitating or killing the target.
When triggered:
[list]
[]The enemy is lifted by the lance and can continue dealing a small amount of collision damage while being carried forward, knocking down other enemies in the path. The damage depends on horse speed, Riding skill, and horse breed. [/]
[]When the impaled body is thrown off the lance, it can also knock down or knock back nearby enemies.[/]
[]The resulting damage depends on horse speed, Riding skill and horse breed.[/]
[]Optional slow motion can be enabled through MCM, including adjustments to the slow-motion camera angle.[/]
[]This is NOT realistic but fun![/]
[/list]The animation was inspired by the cavalry charge kills in [b]Battlefield 1[/b].
However, [b]no Battlefield 1 assets or code were used[/b]. The animation was created manually by me in Blender.
[line]
[b][size=4]II. Ground Combat Guard-Break Improvements[/size][/b]
[list=1]
[]Improved the defensive pressure buildup curve. Pressure now increases more smoothly and consistently.[/]
[]Removed the separate defensive failure chance mechanic, which had become somewhat redundant under the current guard-break system.[/]
[/list][line]
[b][size=4]III. Performance Improvements, Compatibility and Bug Fixes[/size][/b]
[list=1]
[]Improved compatibility with certain large-scale overhaul mods.[/]
[]When this mod's master two-handed combat toggle is enabled, it overrides the latest RBM feature that makes charging infantry and cavalry put away their shields to use their primary weapons. Disabling the toggle restores RBM's original behavior.[/]
[]When overlapping features are detected in mods such as Warbandlord, RBM and TRBM, enabling the corresponding master toggle in this mod gives this mod's implementation priority. Disabling it restores the other mod's behavior.[/]
[]Added an optional guard-break probability bar at the top of the screen. It can be disabled in MCM.[/]
[]Added a customizable hotkey, [b]"/" by default[/b], to display unit names across the battlefield without showing health bars.[/]
[]Reorganized the MCM settings menu.[/]
[]Fixed various minor bugs.[/]
[/list][line]
[b][size=4]Main Features[/size][/b]
See the settings menu or included README for detailed parameters.
[b][size=4]I. Skill-Based Guard Breaks[/size][/b]
Weapon skill matters too little in vanilla, while weapon quality matters too much. This system gives skill and attack quality a greater role in melee combat.
Guard-break chance is calculated from the effective weapon-skill difference between attacker and defender, together with:
- Weapon skill
- Attack energy
- Attack direction — heavy overhead strikes gain more bonus
- One-handed / two-handed mode — two-handed attacks gain more bonus
- Weapon weight
- Relative speed
- Defender pressure
Guard-break chance uses a smooth curve with no fixed skill threshold.
Skilled fighters gain more opportunities to break guards, but weak attacks can still be reliably blocked. Shields have a higher defensive threshold, build less pressure and have a lower failure chance.
[b][size=4]II. Sustained Defensive Pressure[/size][/b]
In vanilla, as long as you hold a healthy shield in the correct direction, you can ignore almost any melee attack indefinitely. That is obviously unreasonable.
Repeatedly blocking or parrying effective melee attacks now builds defensive pressure, eventually causing the guard to collapse. Even highly skilled fighters can be overwhelmed by one or several weaker enemies attacking continuously.
Pressure affects:
- Defensive stability
- Future guard-break chance
- Defensive failure chance
Pressure buildup depends on attack strength, weapon type, attack direction, skill difference, shield use and successful parries.
Shields greatly reduce pressure buildup, but sustained attacks can still break the defence.
Pressure resets when combat is interrupted, after a successful guard break, and in other relevant situations.
[b][size=4]III. Guard-Break Effects[/size][/b]
After a successful guard break:
- Native hit detection is preserved.
- Damage is adjusted according to the type of breakthrough.
- Appropriate native stagger reactions are used.
Shield breaks and weapon-block breaks use different stagger strengths. Strong attacks can cause heavier stagger or even knockdowns, while weak attacks will not force severe reactions.
Shield blocks broken through accumulated pressure also suffer additional durability damage.
[b][size=4]IV. Thrusts Breaking Weapon Blocks[/size][/b]
When enabled, normal thrust attacks will break weapon blocks which makes way more sense.
- Does not apply to shield blocks.
- Ignores the normal guard-break probability cap.
- Post-break damage still scales with skill difference, preventing a pitchfork peasant from mindlessly overpowering an elite fighter.
- Full stagger still requires sufficient attack quality and skill.
[b][size=4]V. Forma[size=4]tion Shield-Stow / Two-Handed Melee Order[/size][/size][/b]
Your Sturgian Reavers finally know how to pull out their two-handed axes! Nord Berserkir will also obey your command, put away their shields, switch their Berserker Axes to two-handed mode, and go full berserker when you need more damage.
- Select one or more formations and [b]press I by default [/b]to toggle two-handed melee mode.
- Eligible infantry with shields and two-handed weapons, including weapons with both one- and two-handed modes, will put away their shields and switch to two-handed combat. Cavalry and units without shields are not forcibly controlled.
- Throwing troops will normally throw first, then switch to melee when ammunition is exhausted.
- If [b]Hold Fire[/b] is issued while the two-handed order is active, throwing troops will immediately draw their two-handed weapons and enter melee. Using [b]Fire at Will[/b] afterwards will not make them resume throwing; press [b]I[/b] to cancel two-handed mode if you want them to use throwing weapons again.
- An optional AI automatic shield-stow system is also available. Non-player AI can decide whether to use two-handed weapons based on engagement distance, nearby ranged threats and pursuit state.
- Designed to work with custom troops and armoury mods as long as their equipment uses normal Bannerlord weapon properties. If your custom troops carry shields and polearms that support both one-handed and two-handed usage, the order will also make them fight two-handed.
[b][size=4]VI. Battlefield Health Bars & Unit Names[/size][/b]
Adds overhead information displays for both friendly and enemy units on the battlefield.
[list]
[]Displays each unit's current and maximum health.[/]
[]Supports displaying troop type names and hero names.[/]
[]Shield and horse health bars for enemies you hit can be enabled or disabled through MCM.[/]
[]Display range, display duration and the toggle hotkey are customizable. The default key is "".[/]
[]Most UI layout settings, UI scale, health bar dimensions, spacing, fonts and colors can be customized directly in the Settings file.[/]
[/list][b][size=4]VII. Battlefield Feats & Combat Inspiration[/size][/b]
[b]Vanilla battles can sometimes feel a little too predictable. Once two armies collide, the fight often becomes a straightforward exchange of casualties until one side collapses.[/b]
I wanted to introduce more battlefield achievements, morale-like inspiration effects and unexpected turning points.
This system introduces [b]four battlefield feats[/b], available to both friendly and enemy troops.
[b]Soldiers who accomplish these feats not only gain combat bonuses themselves, but also inspire nearby allies, increasing their fighting effectiveness and allowing them to press the attack.[/b]In other words, a local victory can create a butterfly effect.
A small group of inspired elite soldiers might suddenly break through an enemy formation, potentially changing the course of the battle.
The four feats are inspired by military honors and battlefield reward traditions from [b]ancient China[/b], with corresponding historical concepts found in medieval Europe and ancient Rome.
[b]1. Capture the Standard — Bannière[/b]
[i]From Old French "baniere", referring to a banner or standard.[/i]
In medieval warfare, a banner was more than a symbol of identity. It served as a rallying point and a center of command on the battlefield.
Capturing an enemy standard was therefore a highly symbolic military achievement.
[b]Trigger:[/b] Defeat an enemy standard-bearer.
[b]Effect:[/b] The soldier who achieves the feat and nearby friendly troops receive a temporary increase to damage, melee attack speed, ranged attack speed and movement speed.
The bonuses last for a limited duration.
[b]2. Break the Line — Vaward[/b]
[i]From Middle English "vaward", derived from Anglo-French "avant-garde", referring to the vanguard or foremost division of an army.[/i]
The vanguard was often responsible for leading an assault and breaking into enemy formations.
[b]Trigger:[/b] Reach a specified number of kills within a single battle.
[b]Effect:[/b] The soldier who achieves the feat and nearby friendly troops receive a moderate increase to damage, melee attack speed, ranged attack speed and movement speed.
The bonuses are stronger and last longer than those granted by Capture the Standard.
[b]3. First Over the Wall — Corona Muralis[/b]
[i]From ancient Rome's "Corona Muralis", or Mural Crown.[/i]
This was a prestigious military decoration traditionally awarded to the first soldier to scale an enemy's fortified wall.
[b]Trigger:[/b] During a siege, be the first soldier to climb onto the enemy wall and defeat a defender.
[b]Effect:[/b] The soldier who achieves the feat and nearby friendly troops receive substantial combat bonuses to the same four attributes.
The bonuses are stronger and last longer than those granted by Break the Line.
[b]4. Slay the Commander — Spolia Opima[/b]
[i]From the ancient Roman tradition of "Spolia Opima", one of the rarest and most prestigious military honors, associated with personally defeating an enemy commander in combat and taking his arms.[/i]
[b]Trigger:[/b] Defeat the enemy army commander.
[b]Effect:[/b] The soldier who achieves the feat and nearby friendly troops receive a major increase to damage, melee attack speed, ranged attack speed and movement speed.
[b]This feat provides the strongest bonuses and the longest area-inspiration duration of the four.[/b]
[b]Additional Battlefield Feat Mechanics[/b]
[list]
[][b]Commander inspiration:[/b] When an army commander personally accomplishes a battlefield feat, the inspiration bonus granted to nearby soldiers receives an additional increase over its normal value.[/]
[][b]Personal armor bonuses:[/b] In addition to the basic combat buffs, the soldier who accomplishes a feat receives an extra bonus to armor values across the body. This is also compatible with RCM's special armor calculation system.[/]
[][b]Persistent personal bonuses:[/b] For ordinary soldiers and heroes (excluding the player), the personal bonuses earned from battlefield feats remain active until that unit leaves the battle.[/]
[][b]Temporary area inspiration:[/b] Soldiers who are inspired by another unit's achievement only receive the bonuses for a limited duration. When the player personally accomplishes a feat, the player's own bonus is also time-limited.[/]
[][b]Battlefield announcements:[/b] Friendly and enemy achievements use different announcement banners and sound effects. [b]The text were translated from Chinese to English by AI. Therefore it might not be that natural. You are welcome to change the text in "GroundedCombatMechanics\ModuleData\BattleFeatTexts.xml"[/b][/]
[][b]Visible feat titles:[/b] Units who accomplish battlefield feats display the corresponding title above their heads until they leave the battle.[/]
[][b]Fully customizable:[/b] Announcement banners, sound effects, inspiration radius, soldier battle cries and each individual battlefield feat can be enabled or disabled separately through MCM.[/]
[/list]The purpose of this system is not simply to make soldiers stronger.
[b]I want individual battlefield achievements to matter, and for local victories to occasionally develop into larger breakthroughs, making battles feel less predictable and more alive.[/b]
[b][size=4]VIII. Assign Captains During Battle[/size][/b]
Vanilla cannot assign a new captain after the original captain dies, when joining an ongoing battle, or in sieges where you are not the commander. This can leave formations without captain perks.
[list]
[]Select a formation and press N by default to assign a surviving hero as its captain.[/]
[]Captain perk bonuses are still handled entirely by the game's native system.[/]
[/list][b][size=4]IX. Crowd-Gap Attacks[/size][/b]
In vanilla, fighting inside a crowd, especially during sieges, can make polearms and longer weapons almost useless because attacks constantly collide with allies.
This module allows certain melee attacks to continue checking for enemies after hitting an ally, but only when the attack actually passes through a valid physical gap.
Supported:
[list]
[]High thrusts[/]
[]Low thrusts with stricter checks[/]
[]Overhead strikes[/]
[/list]Not supported:
[list]
[]Horizontal swings[/]
[]Attacks passing through the centre of another character's body[/]
[]Shield collisions[/]
[]Unarmed attacks[/]
[]Ranged attacks[/]
[]Braced spears, couched lances and similar special attacks[/]
[/list]The module only extends native collision checking. It does not create artificial hits or damage.
Higher geometry thresholds in MCM / F10 mean stricter detection.
[b][size=4]X. Out-of-Combat Health Recovery[/size][/b]
Provides battlefield units with limited automatic health recovery.
By default, this is not intended as a one-man-army mechanic. Recovery conditions are deliberately strict, though they can be adjusted.
A unit must:
[list]
[]Avoid taking damage for a period of time[/]
[]Avoid receiving successful enemy melee pressure during that period[/]
[/list]It will then recover a small amount of health.
Recovery speed scales with Athletics. Default is approximately 1 HP every 10 seconds at 300 Athletics.
Higher Athletics means shorter recovery intervals.
Supported:
- High thrusts
- Low thrusts with stricter checks
- Overhead strikes
Not supported:
- Horizontal swings
- Attacks passing through the centre of another character's body
- Shield collisions
- Unarmed attacks
- Ranged attacks
- Braced spears, couched lances and similar special attacks
The module only extends native collision checking. It does not create artificial hits or damage.
Higher geometry thresholds in MCM / Shift + CTRL + M mean stricter detection.
[line]
[b][size=5]Menu & Settings:[/size][/b]
Supports:
- MCM menu
- Independent toggles for major systems
- Real-time guard-break threshold and pressure display
Different Bannerlord versions and third-party mod combinations may behave differently. If you encounter an issue, please provide:
- Game version
- Mod list and load order
- diagnostic.log from the mod folder
- Crash report
For bugs, feedback or ideas, join the QQ group:
1105727960
正在加载版本记录…
正在加载评论…
评论在新手盒子客户端中发表,这里同步展示。