黑魔商优化

黑魔商优化

优化铸魂后黑魔伤的战斗循环:主动切入闪避、AAABB追击、混合连段拼刀、魔气护体及独立黑魔杀气大招循环。附紧凑HUD与17项数值配置。 Reworks forged Hei Mo Shang with manual entry dodges, AAABB follow-ups, clash-enabled combos, Moqi Guard and a four-point black Sha-Chi ultimate cycle. Compact HUD and

黑魔伤铸魂后动作优化|1.0.0

让切入闪避、完闪追击与血脉觉醒连成一套战斗循环。

针对《影之刃零》铸魂后的黑魔伤,沿用游戏原生动作与效果,调整主动闪避、气凝与大招释放,新增魔气护体和独立黑魔杀气。普通未铸魂黑伤不在调整范围内。

以下均为默认配置。 A代表轻击,B代表重击;按键以自己的游戏设置为准。时长、倍率与费用可通过config.json调整。

主动闪避与气凝

  • 原LB+Y气凝攻击替换为主动切入闪避,同一把武器也可使用切刀闪避及完闪追击。
  • 正常切刀获得20秒气凝;完闪成功后,本次气凝总期限延长至动作开始后30秒。
  • 主动闪避获得10秒气凝;完闪成功后,本次气凝总期限延长至动作开始后15秒。
  • 主动闪避费用=
max(56+普通杀气上限×12%, 56)×饰品减耗系数

。原生Lv2系数0.7优先,其次Lv1为0.85,否则为1。费用不足不能主动释放;正常切刀不收费。

  • 主动完闪成功,返还本次实际消耗的50%,原生杀气上限封顶,同一次激活只返还一次。

完闪追击与拼刀

  • 切入完闪后的突刺可按轻击衔接一次AAABB追击,追击不刷新魔气护体持续时间。
  • AB、ABB、AAB、AABB、AAAB、AAABB、AAAAAB混合连段中的B段加入原生拼刀能力;纯A、纯B不新增。

魔气护体

  • 正常切刀完闪成功获得5秒;主动完闪成功获得6.5秒。
  • 受到的物理、元素生命伤害降低40%,并获得大武器级霸体。
  • 大招强化同时给予等长护体;多个来源取较晚截止时间,不重复叠加减伤。

黑魔杀气与大招

  • 独立黑魔杀气上限4颗,与普通杀气、精纯杀气分开计算。
  • 战斗处决、红光完闪、正常切刀完闪、蓝光完美招架各获得1颗;自动防御成功也可获得。主动切入完闪不增加黑魔杀气。
  • 不足4颗时施展绝技,消耗1颗精纯杀气进入一段强化,并补满4颗黑魔杀气。
  • 满4颗时施展绝技,直接消耗4颗释放二段魔浪滔天,不消耗精纯杀气。
  • 切换武器保留黑魔数量;死亡、换图或更换角色时清空,不写入存档。

血脉觉醒与魔浪滔天

  • 一段强化持续20秒,Attack倍率为1.1(+10%),并获得20秒魔气护体。
  • 强化期间可自动完美招架蓝光、完美闪避红光,仍受原生动作状态限制。
  • 二段在当前强化剩余时间上追加10秒;没有强化时直接获得10秒,并附带等长护体。
  • 强化若在二段动作中到期,维持至该次二段结束。
  • 二段指定原生攻击资源的物理、元素伤害系数为原版的80%,对敌方杀气伤害系数为原版的130%。这些系数与Attack强化分别计算,最终伤害仍受原生属性及敌方防御影响。

远程战斗处决

  • 最远20米内,满足原生处决资格且动作适用的目标可显示战斗处决提示。
  • 近距离保留原有三组处决候选;超出近距离至20米时,只使用指定的成对处决动作。
  • 保留敌人资格与原生动作兼容规则,不保证所有Boss都能远程处决。其他Boss专属处决保持原版距离。
  • 瞬杀、潜行与空中处决不在此次远程调整范围内。

UI与配置

  • 黑魔图标保留逐颗填充、0/4~4/4数字和满额金色,不显示LT;护体保留图标、圆环和剩余秒数。两个图标均去掉常驻汉字名称,悬停说明保留。
  • 武器菜单介绍沿用游戏原文,未修改;玩法以本说明和配置为准。
  • 17项主要时长、护体倍率、攻击与二段系数、主动费用及返还比例可通过同目录
config.json

配置。启动读取一次,修改后重启;详细字段、允许范围和费用公式见下载包内《配置说明.md》。

安装、更新与卸载

有两种下载方式:

  • Offline Full新手完整包:同时提供“首次安装含前置”和“已有UE4SS仅MOD”两条路径,选其中一条,附中文离线安装指南。
  • Mod Only仅MOD包:用于已有匹配UE4SS与共享UEHelpers的玩家,不包含公共前置。
  1. 完全退出游戏。在Steam中右键游戏,选择“管理→浏览本地文件”,确认根目录包含platform和ProjectPBZ。
  2. 更新前,把旧PBZHeiMoShang整个目录移到游戏目录外备份,保留自己的config.json;不要只改名留在Mods内。
  3. 按包内说明复制对应的platform文件夹到游戏根目录,合并同名文件夹。已有加载器时不要用首次安装目录覆盖公共DLL和配置。
  4. 正确路径为platform/steam/ue4ss/Mods/PBZHeiMoShang/Scripts/main.lua。保留空enabled.txt、全部26个Lua与两张Textures PNG。
  5. 更新用户将旧config.json恢复到新目录,再正常启动游戏。已有管理器维护的MOD,请按原管理器的更新与文件归属流程处理。

卸载:退出游戏,将PBZHeiMoShang整个目录移到游戏目录外;如曾手动添加加载项,只移除对应项。其他MOD仍需要的公共UE4SS应保留。

适配与验证

面向Windows 64位Steam版,当前依据为Steam build26367565 / CL-302256_JKS-17280。前置为PBZ专用UE4SS v3.0.1-1195-g1ceefac8,并需要共享UEHelpers。已有适配环境只安装MOD;不需要Mods Menu、PBZModLoader、木桩或出招查看器。

1.0.0发布包已完成离线核验。4018项功能合同、26项观察器断言和26个Lua语法检查通过;1.0.0完整包的纯净冷启动、新版UI显示及全部战斗/Boss场景未另做实机验证。

运行数值只作用于游戏进程;本包不直接编辑存档。多个MOD同时修改黑魔伤输入、技能、效果或处决时可能冲突,未验证所有组合。退出游戏后移出整个PBZHeiMoShang目录可停用,已有公共UE4SS和其他MOD应保留。


English — Hei Mo Shang Combat Rework | 1.0.0

Connect entry dodges, perfect-dodge follow-ups and Bloodline Awakening into one combat loop.

For the forged Hei Mo Shang blade in Phantom Blade Zero, not the un-forged starting weapon. Uses existing native moves and effects. All values below are defaults; A means light and B means heavy. Your own in-game bindings still apply.

Gameplay changes

  • Stance + heavy (default controller LB+Y) performs the incoming-weapon dodge without changing weapons. A normal switch grants 20s of Chi; a perfect switch sets its deadline to 30s after entry. Manual entry grants 10s, or 15s after a perfect dodge.
  • Manual entry spends ordinary Sha-Chi: max(56 + 12% of maximum, 56), then the native accessory discount. A confirmed success refunds 50% of the actual spend, once. Ordinary switching is free.
  • After the perfect-dodge thrust, light attack can add one native AAABB follow-up. It does not extend protection.
  • Native clash support is added to the heavy parts of AB, ABB, AAB, AABB, AAAB, AAABB and AAAAAB (A=light, B=heavy).
  • Moqi Guard lasts 5s after a normal perfect switch, or 6.5s after manual entry success. It grants heavy-weapon super armor and 40% physical/elemental health-damage reduction. Sources use the later expiry; reduction does not stack.
  • An independent black Sha-Chi bank holds 0–4. Confirmed combat executions, red perfect dodges, normal perfect switches and blue perfect deflects grant one; automated successes count. Manual entry success refunds ordinary Sha-Chi but does not add black Sha-Chi.
  • Below four, the ultimate spends one native charge to enter Main and fill the bank. At four, it spends the bank to cast Molang/Exit without a native charge. The bank survives weapon switching and clears on death or avatar/world changes.
  • Main empowers for 20s, with Attack x1.1 and matching protection. Native automatic perfect blue defense/red dodge is enabled subject to action restrictions. Exit adds 10s to remaining empowerment, or grants 10s if absent. Empowerment is held through an active Exit when needed.
  • The five scoped native Exit resources use physical/elemental factors x0.8 and enemy Sha-Chi damage x1.3. These combine separately with Attack and native combat calculations.
  • Combat execution detection reaches 20m for eligible, animation-compatible targets. The original three near-range choices remain; far selection uses one specific paired animation only. This does not make every Boss remotely executable. Stealth, aerial and quick executions keep their native reach.
  • Compact HUD: numeric black count, quarter fill, full gold, protection ring and seconds. No persistent Chinese labels or full-bank LT text; tooltips remain. Native weapon-menu descriptions are unchanged.
  • 17 numeric settings in config.json, read once at process startup. Restart after editing. Missing/invalid fields fall back to defaults; malformed files use all defaults. The detailed setting guide lists names, ranges and formulas.

Requirements and installation

Choose the appropriate download: Offline Full provides separate first-install and existing-loader paths, plus an offline guide. Mod Only is for an existing compatible UE4SS environment and does not replace public loader files.

  1. Exit the game. Use Steam > Manage > Browse local files; the correct root contains platform and ProjectPBZ.
  2. Move the old PBZHeiMoShang folder outside the game and back up config.json. Renaming an enabled copy inside Mods can leave it loading.
  3. Merge the package's platform folder into the game root. Existing loaders should use the MOD-only path, not overwrite shared DLLs/settings with a first-install directory.
  4. Verify platform/steam/ue4ss/Mods/PBZHeiMoShang/Scripts/main.lua. Keep enabled.txt, all 26 Lua files and both Textures PNGs.
  5. Restore your personal config.json after updating and restart. If a manager owns the old installation, follow its update/ownership workflow.

Configuration: edit the 17 numeric settings in config.json, save UTF-8, and fully restart the game. Durations, guard reduction, Attack/Exit factors and manual-entry costs/refund are configurable. The file is read once, never polled during combat. Missing/invalid fields use defaults; malformed files use all defaults and log CONFIG messages.

Removal: exit and move the complete PBZHeiMoShang folder outside the game. Remove only its manually added loader entry, if any; keep the public loader used by other MODs.

Compatibility and validation

Windows x64 / Steam build26367565, CL-302256_JKS-17280. Requires the game-specific UE4SS 1195/1ceefac8 build and shared UEHelpers. No Mods Menu, PBZModLoader, trainer, move inspector, account or online activation is needed.

4018 gameplay contracts, 26 observer assertions and 26 Lua syntax checks passed offline. A clean bundled-loader cold start and all combat/Boss cases have not been newly tested for this release; packaging checks do not prove native combat/rendering. No game EXE, save, other gameplay MOD or personal configuration is included.