乱元剑 - 锻魂后招式优化

乱元剑 - 锻魂后招式优化

优化乱鸢剑铸魂后的动作与手感:鸣剑、切刀后接入六段重攻击循环,增强远距离追击与后撤,并将杀气连招消耗参数降低20%。保留武器外观,无需快捷键,安装后自动生效。 Improves the soulforged Luanyuan Sword with a six-step heavy-attack loop after the buff or weapon-switch attack, stron

中文完整介绍

乱鸢剑铸魂后动作优化
Luanyuan Sword - Post-Soulforging Moveset Optimization

针对铸魂后的乱鸢剑调整连招路线、追击与后撤,让鸣剑或切刀后的连续重攻击更加丰富,同时降低杀气连招的资源消耗。

连招调整

鸣剑与切刀两条起手路线,统一进入以下六段循环:

P2_Buff/SWT_P2
        ↓
P2_BB → B → BB → BBB → P2_B → P2_AB
  ↑                              │
  └──────────继续重攻击循环────────┘
  • P2_Buff:鸣剑起手。
  • SWT_P2:切刀攻击起手。
  • B/BB/BBB:普通技能配置 GA_Hun_LuanYing_B/BB/BBB。
  • 原来的 P2_BBB 不加入这条路线。

沿用游戏当前的重攻击键操作,无需重新设置键位。手柄默认布局通常为 Y,以你的游戏设置为准。

追击与后撤优化

  • 扩大 P2_BB 的目标追击范围与最大接近距离。
  • 提前追击位移窗口,加快接近敌人的过程。
  • 强化鸣剑后撤,后撤位移参数在此前调校基础上提高20%。

实际移动距离会受到目标位置、地形和碰撞影响。

杀气消耗降低20%

铸魂强化状态下,相关杀气连招的固定消耗、比例系数和最低消耗同步乘以 0.8,避免折扣被原最低消耗限制抵消。

例如:

  • 固定及最低消耗:70 → 56。
  • 常规比例系数:约 8% → 6.4%。
  • 鸣剑起手比例系数:约 15% → 12%。

覆盖当前路线使用的 B/BB/BBB、P2_B/P2_BB/P2_AB,以及鸣剑起手和铸魂重击派生 P2_AAB/P2_AAAB。

退出铸魂强化状态后,普通 B/BB/BBB 恢复原消耗配置。其他武器、杀气回复速度和强化触发条件不调整。最终扣除量仍可能受到原生计算、取整及其他装备效果影响。

保留的内容

保留乱鸢剑的武器外观,使用游戏已有动作资源,不替换动画文件。伤害和技能命中窗口保持原有设置。

安装后自动运行,没有启停快捷键、调试面板或出招查看器,无需在游戏中额外开启。

前置要求

需要适配《影之刃零》的 UE4SS,并包含共享 UEHelpers。

目标适配版本:

Steam build 26367565
CL-302256_JKS-17280

其他游戏版本及平台尚未验证。

安装方法

  1. 完全退出游戏。
  2. 在 Steam 游戏库中右键游戏,选择“管理 → 浏览本地文件”。
  3. 如已安装旧版,将旧 PBZP2Routes 文件夹移到游戏目录外备份,避免多个版本同时加载。
  4. 将本体压缩包中的 platform 文件夹复制到游戏安装根目录,合并同名文件夹。
  5. 确认安装路径为:
platform/steam/ue4ss/Mods/PBZP2Routes/

该目录中应包含 enabled.txt,其 Scripts 文件夹内应包含 main.lua、phase.lua、cost.lua 及其余配套脚本。请完整复制,不要只替换入口文件。

enabled.txt 是空文件,这是正常现象,请保留。

启动游戏进入存档,装备铸魂后的乱鸢剑,等待约5秒完成技能发现,再测试鸣剑和切刀后的连续重攻击。技能较多时,首次发现可能需要更长时间。

兼容与卸载

避免同时使用修改相同乱鸢技能、接招标签或位移参数的 Mod。升级前请停用旧版 PBZMoveLab、PBZP2Mobility。

已有前置玩家应保留自己的 UE4SS 公共配置。打桩 Mod 属于独立工具,不是本 Mod 的必需前置。

卸载时完全退出游戏,将以下文件夹移出游戏目录后重新启动:

platform/steam/ue4ss/Mods/PBZP2Routes

本 Mod 不修改存档或原始游戏资源包。


English Full Description

Luanyuan Sword - Post-Soulforging Moveset Optimization

Chinese name: 乱鸢剑铸魂后动作优化

Adjusts the soulforged Luanyuan Sword’s combo routes, pursuit and backstep, expanding its continuous heavy-attack sequence after the buff or weapon-switch attack while reducing Shaqi combo cost parameters.

Combo Changes

Both starters lead into the same repeating six-step sequence:

P2_Buff / SWT_P2
        ↓
P2_BB → B → BB → BBB → P2_B → P2_AB
  ↑                              │
  └──── Continue heavy attacks ────┘
  • P2_Buff: the sword’s buff/backstep starter.
  • SWT_P2: the weapon-switch attack.
  • B / BB / BBB: the ordinary ability configurations GA_Hun_LuanYing_B / BB / BBB.
  • The original P2_BBB remains excluded from this route.

Continue using your existing heavy-attack binding. This is usually Y on the default controller layout, but your own game settings take precedence.

Improved Pursuit and Backstep

  • Increases P2_BB target acquisition range and maximum approach distance.
  • Moves the pursuit window earlier for a faster approach.
  • Strengthens the buff action’s backstep, increasing its movement parameters by 20% over the previous tuning.

Actual travel distance depends on target position, terrain and collision.

20% Lower Shaqi Cost Parameters

During the soulforged enhancement state, the relevant combo abilities’ fixed cost, proportional multiplier and minimum cost are all multiplied by 0.8. This prevents the original minimum cost from cancelling out the reduction.

Examples:

  • Fixed and minimum cost: 70 → 56.
  • Standard proportional multiplier: approximately 8% → 6.4%.
  • Buff starter multiplier: approximately 15% → 12%.

This covers the route’s B / BB / BBB and P2_B / P2_BB / P2_AB, along with the buff starter and soulforged heavy-attack follow-ups P2_AAB / P2_AAAB.

The ordinary B / BB / BBB cost settings are restored outside the soulforged enhancement state. Other weapons, Shaqi regeneration and enhancement activation conditions are unchanged. Final deductions may still be affected by native calculations, rounding and equipment effects.

Preserved Features

Preserves the sword’s appearance and uses existing game animations without replacing animation files. Damage values and hit windows are unchanged.

Automatically active when loaded. No toggle hotkeys, debug overlay or move-inspection tool is included, and no additional in-game activation is required.

Requirements

Requires a working Phantom Blade Zero-compatible UE4SS installation with shared UEHelpers.

Target game build:

Steam build 26367565
CL-302256_JKS-17280

Other game builds and platforms have not been verified.

Installation

  1. Exit the game completely.
  2. In your Steam Library, right-click the game and select Manage → Browse local files.
  3. If upgrading, move the old PBZP2Routes folder outside the game directory as a backup. Do not leave multiple enabled copies inside Mods.
  4. Copy the Mod Only archive’s platform folder into the game installation root, merging folders with the same name.
  5. Confirm the installation path:
platform/steam/ue4ss/Mods/PBZP2Routes/

This folder must contain enabled.txt. Its Scripts folder must include main.lua, phase.lua, cost.lua and all accompanying scripts. Copy the complete mod rather than replacing only the entry script.

The empty enabled.txt file is intentional. Keep it.

Launch the game normally, load your save, equip the soulforged sword and allow approximately five seconds for ability discovery. Large ability lists may require longer. Then test continuous heavy attacks after both starters.

Compatibility and Removal

Avoid combining mods that modify the same Luanyuan abilities, continuation tags or movement parameters. Disable older PBZMoveLab and PBZP2Mobility versions before upgrading.

Players with an existing loader should preserve their UE4SS configuration. Training Dummy mods are separate tools and are not required by this mod.

To uninstall, exit the game and move the following folder outside the game directory:

platform/steam/ue4ss/Mods/PBZP2Routes

Restart the game afterwards. This mod does not edit saves or original game archives.